- Home
- Coil Evaporative Condenser Manufacturers
Coil Evaporative Condenser Manufacturers in Bangladesh | Siddhant Equipment
Siddhant Equipments Pvt. Ltd is foremost coil evaporative condenser manufacturers, suppliers, exporters in Bangladesh. Our business is a cross point of the effective refrigeration and the efficient water management, providing the integrated solutions, necessary to the large-scale industrial and commercial use worldwide. We boast of making strong units that combine the operation of a cooling tower with those of a heat exchanger into a single unit but powerful. All of the coil condensers manufactured by us are of the highest standard to meet the demanding international standards in terms of thermal efficiency, structural integrity and durability, which is particularly important when exporting the coil condensers to such challenging climates as the Middle East.
We are prominent Coil Evaporative Condenser suppliers in Bangladesh
Being a supplier and exporter, we are able to execute a project in a seamless way, which includes design, fabrication, quality assurance and this in addition to complex logistics which enables us to provide full systems to clients in places all over the world. We do not just offer our products but rather offer full service in terms of technical support services and spares, and we are willing to have long term relationships with our clients who have confidence with us to offer them optimum performance at all times in refrigeration. We can enable industries to work effectively by focusing on innovation and quality and reducing their impact on the environment.
What is Coil Evaporative Condenser?
A Coil Evaporative Condenser is a heat rejection device which is all condenser and all cooling tower in one unit. Coil Evaporative Condenser manufacturers in Bangladesh operates by adding warm refrigerant vapor into a closed coil as it spays water over the coil at the same time forcing air across the coil to cause evaporative cooling.
Types of Coil Evaporative Condenser
Being as Coil Evaporative Condenser manufacturers in Bangladesh, according to airflow type we provided different types which are given below.
By Airflow Type
- Forced Draft: Fans force air into the unit at the bottom creating an up and out movement.
- Axial Fan: Best suited to large industrial applications, low HP, easy to maintain, broad range of capacities.
- Centrifugal Fan: Centrifugal fans are to be used in the case of noise consideration because they are less noisy for Coil Evaporative Condenser suppliers in Bangladesh.
- Induced Draft: Fans (typically axial) are positioned on the top, and they move up currents of the air by the coil and spray.
- Counterflow: Water flow is opposite to the flow of air, which is as well opposite to the flow of refrigerant, and helps to maximize the heat transfer efficiency.
- Combined Flow: Employs the use of the condensing coil and another surface of fill to have a heat transfer, which is economical in cooling for Coil Evaporative Condenser exporters in Bangladesh.
Other Classifications and Types associated.
- Hybrid: Evaporation cooling but has air-cooled areas.
- Bunker Coils: Coils are very large in size and they are finned and frequently found in cold storage.
- Ammonia Evaporative Condensers: The ammonia evaporative condensers are designed to be utilized in industrial ammonia refrigeration systems.
Technical Specifications of Coil Evaporative Condenser
We've added below a specialized table of Coil Evaporative Condenser in Bangladesh that provides further technical specification information
| Specification / Type | Induced Draft (Standard) | Forced Draft (Alternate) | Counterflow (Efficiency) | Combined Flow (Anti-Scale) | Hybrid (Plume/Water Saving) |
|---|---|---|---|---|---|
| Fan Location | Top (Pulling air out) | Bottom (Pushing air in) | Top or Bottom | Top (Axial) or Side (Centrifugal) | Top (Axial) |
| Internal Pressure | Negative Lower recirculation risk | Positive (Higher recirculation risk) | Negative or Positive | Negative (Over coil) | Negative |
| Air / Water Flow | Counterflow or Crossflow | Counterflow or Crossflow | Counterflow (Air ↑ vs Water ↓) | Parallel flow over coil + Crossflow over fill. | Wet (Evaporative) + Dry (Air Cooled) sections. |
| Coil Scaling Risk | Moderate to High | Moderate to High | Moderate to High | Significantly Reduced (Evaporation happens primarily in the fill, not the coil) | Reduced in dry/part-wet mode. |
| Fan Maintenance | Difficult (Fan is in corrosive, moist discharge air) | Easy (Fan is in dry ambient air) | Varies by fan location (usually difficult) | Easier access to fan/motor than standard Induced Draft designs. | Standard, similar to Induced Draft. |
| Typical Efficiency | High (Excellent air/water contact) | Lower than Induced Draft (Recirculation risk) | Highest (Maximum temperature approach) | Very High (Protects coil, maintains efficiency) | High, plus Water Savings and Plume Abatement benefits. |
Benefits of Coil Evaporative Condenser
We as Coil Evaporative Condenser suppliers in Bangladesh, we provided different benefits which are given below.
- Superior Thermal Efficiency: Coil Evaporative Condenser manufacturers in Bangladesh attains lower condensing temperature in comparison with air-cooled condensers which, by implication, results in better Coefficient of Performance (COP) of the entire refrigeration system.
- Water Quality Protection: The refrigerant circulates in a closed coil and thus, the refrigerant is secured and the internal surface of the unit is clean and scale-free for Evaporative Condensers.
- Compact System Components: Combining the condenser and cooling tower functions into a single unit does not require an independent water pump and piping system system to simplify the entire layout of the plant for Condensing Coil.
- Reduced Pumping Power: The combined design needs less water to circulate as compared to separate systems; thus, less energy is used in pumping heads of water.
- Contaminant Exclusion: The closed-loop type prevents the external air contaminants or dusts to contaminate the internal heat exchange surface; thus, it remains efficient throughout long periods of operation.
Applications of Coiled Evaporative Condenser.
We serve as leading Coil Evaporative Condenser exporters in Bangladesh, we provided different applications which are given below.
- Industrial Refrigeration Systems: These are necessary in ammonia and large Freon refrigerators that are applied in food processing, warehousing, or large-scale beverage manufacturing.
- Large Commercial HVAC Systems: Large commercial chiller systems are used to provide high efficiency in large-scale air conditioning chiller plants in skyscrapers, airports, and commercial complex scale.
- Chemical and Petrochemical Processing: Coil Evaporative Condenser manufacturers in Bangladesh is used to condense solvent vapors as well as to cool process fluids during the critical manufacturing processes that need a high level of control in temperature.
- Natural Gas Liquefaction: Recold MC Evaporative Condenser is used in the midstream oil and gas operations to reject heat in the compression and cooling process of the natural gas processing and liquefaction.
- Wastewater Treatment Plants: These are used to cool the heat exchangers related to sludge digestion and other exothermic reactions that are typical of the large municipal treatment plants.
Siddhant Equipments Pvt. Ltd is outstanding coil evaporative condenser manufacturers, suppliers, exporters in Bangladesh. Our Evaporative Condensers can unlock to a Maximum Performance! We are your international Manufacturer, Supplier and Exporter, and we provide the future of refrigeration efficiency. Our Coil Evaporative Condensers have built in heat rejection that reduces drastically the condensing temperature and saves a lot of energy. They are built to withstand all the extreme weather conditions such as that in Bangladesh and this guarantees maximum reliability, water conservation and a small footprint always in the face of the toughest industrial needs. Select performance and durability; select our thermal solution.
(FAQs).
A: It refutes the latent heat at the refrigerant coil, and thus requires the minimum of water spray as opposed to cooling a cooling intermediate water loop.
A: Yes, the design of the condensate system and the coil material can be tailored to safely and effectively condense several refrigerants, such as ammonia (R-717) and common HFCs/HFOs.
A: The main maintenance is to monitor and treat the recirculating spray water to avoid formation of scale on the outside of coil and the sump basin is to be clean.